Single Floppy Instructions

If you are installing from a CD-ROM, you can install using a boot
floppy only.  Use the chart below to find out what the proper parameter 
should be for your device.  Enter it at the boot prompt like the example.

CD-ROM Device            Paramter    CD-ROM Device              Parameter
=============            =======     =============              =========
IDE hda                  /dev/hda    Sony 535                   1800
IDE hdb                  /dev/hdb    CDU 31 or 33               0F00
IDE hdc                  /dev/hdc    Aztech                     1D00
IDE hdd                  /dev/hdd    Phillips CM206             2000
SCSI                     0B00        Goldstar                   1000
Sound Blaster (non-IDE)  1900        Mitsumi (non-IDE)          1700

Examples (for CD-ROM on /dev/hdc - substitute accordingly):

CD-ROM auto-detected:       boot: linux root=/dev/hdc ramdisk=256 
CD-ROM not auto-detected:   boot: linux root=/dev/hdc hdc=cdrom ramdisk=256

Any other parameters you may need can be added to the end of this line.

[F1-Main] [F2-CD] [F3-SCSI] [F4-Ether] [F5-Other] [F6-Help] [F7-Single]