SCSI Help

The format of the SCSI parameters are as follows:

SCSI Seagate ST0x                   st0x=base_addr,irq
SCSI Future Domain TMC-8xx          tmc8xx=base_addr,irq
SCSI Trantor T128                   t128=base_addr,irq
SCSI NCR-5380 Based                 ncr5380=port,irq,dma_channel
Adaptec 15{1,2}x, SoundBlasterSCSI  aha152x=port,irq,scsi_id,reconnect,parity
Adaptec 1542                        aha1542=base_addr
Buslogic                            buslogic=base_addr
Pro Audio Spectrum / Studio 16      pas16=port,irq

Some examples would be:
        boot: linux aha1542=0x330
        boot: linux aha152x=0x330,11,7
        boot: linux tmc8xx=0x330,11

The above are explicit.  For an AHA1522, use "aha152x".  For an
AHA1505, use "aha152x".  For a TMC800, use "tmc8xx".  Do not
substitute the "x"s with your particular card model number!

[F1-Main] [F2-CD] [F3-SCSI] [F4-Ether] [F5-Other] [F6-Help] [F7-Single]